Kawasaki 900/1100 Billet Head Installation And REMOVAL Instructions
download 1) Remove stock head and clean the top surface of the cylinder. 2) Remove the stock water fitting from the stock head and install it in the ADA Racing® billet head in the center cylinder...
View ArticleYAMAHA V-STAR 650 EXHAUST SYSTEM REMOVAL AND INSTALLATION
download REMOVING THE STOCK EXHAUST SYSTEM 1. Remove the right hand frame cover to avoid scratching it. 2. Remove the nuts that mount the rear header to the cylinder head. 3. Loosen the pinch clamp on...
View ArticleYAMAHA ROAD STAR LONGSHOT EXHAUST SYSTEM INSTALLATION MANUAL
download 1. Remove the header flange nuts from the rear cylinder. 2. Loosen the muffler clamp on the front head pipe. 3. Remove the two muffler mounting bracket bolts, located between the two mufflers....
View ArticleYamaha V-Star 650 Outlaw Part Installation Instructions
download Remove both Allen bolts that hold the muffler together (Fig. 1) . Also Loosen clamp from the front muffler to front head pipe (Fig. 2) , and remove allen bolts from rear head pipe and remove...
View ArticleYAMAHA V-STAR 650 CRUZER EXHAUST SYSTEM INSTALLATION MANUAL
download STOCK EXHAUST SYSTEM REMOVAL 1. This Exhaust system is specifically designed for California models, before continuing be sure it is the correct system for your application. 2. Loosen clamp...
View ArticleYAMAHA V-Star 1100 Carburetor Bowl Screw Repair and Removal After Stripping...
download When I first started working on bike many years ago, I learned the danger of stripping the heads of Philips screws when removing or installing them on motorcycles. I remember the two worst...
View ArticleMECHANIC CERTIFICATION REQUIREMENTS MDOS Form: Repair Facility Manual
download Chapter 7: Mechanic Certification Requirements Page 4 7-2.2 Heavy-duty Truck Certification Categories. The Heavy-duty Truck Repair categories requiring mechanic certification to repair...
View ArticleYamaha Road Star 1600/ 1700 Exhaust kit bill of materials Installation...
download 1. Remove left side cover, by removing allen bolt as shown (Fig 1). Once bolt is removed, push cover to motor and push back carefully to your upper body. Figure 1 2. Once left side cover is...
View ArticleCYLINDER HEAD REPAIR MANUAL
download ADJUSTABLE CYLINDER HEAD STAND Head can be rotated 360 degrees. Stays in any position using a simple locking mechanism. Use on twin or four cylinder heads. Shipping weight: 14 lbs. Adjustable...
View ArticleYAMAHA VIRAGO 700/ 1100 2 into 2 EXHAUST SYSTEM REMOVAL AND INSTALLATION MANUAL
download REMOVING THE STOCK EXHAUST SYSTEM 1. Loosen the slip joint clamp on the front and rear head pipe, which are located at the muffler box. 2. Remove the two nuts that hold the front head pipe to...
View Article
